The Ginkgo is a trickline anchor, built to be extra strength solid, with a MBS of 110 kN, it is aimed at all those who want to pull off high amplitude tricks without fear. This has been designed and built to be the highest breaking strength webbing anchor on the market.
Intended for webbings of between 40 – 50 mm, it has (WLL) of 20 kN, a 35 mm central diverter and a 16 mm stainless steel pin
Warning: Last items in stock!
21 mm eyelet, use rather a shackle wll 3t25, or stainless shackle 12-20mm or shackle 2t. (Opening of the shackle minimum 20 mm)
Weight: 783 g
Material: Stainless Steel
Use for Webbing Width: 40 – 50 mm
Working Load Limit (WLL): 20 kN
Maximum Breaking Strength (MBS): 110 kN
The Ginkgo are supplied with 2 foam lock washers to use 2.5 cm and 3 cm straps. The foam washer can be put in place or removed in an instant, for more rigidity of the washer do not hesitate to close with a piece of tape.
ALWAYS USE BACKUP SECURITY, AVOIDING RISK OF COMPONENTS BREAKING WHICH COULD LEAD TO SERIOUS INJURY OF EVEN DEATH.
NOT TO BE USED FOR HIGHLINING
MADE IN FRANCE
Limit during resistance tests made by MECASEM ( independent laboratory), the sling breaks before reaching 150 kN minimum: 102.95 kN
Think of drying and to clean your Ginkgo after use.
|Charge Maximale d'Utilisation (CMU)||40 kN|
|Charge de Rupture (CR)||150 kN|
|Diamétre du réa||35 mm|