The pack Slack Mountain Jumpline Triceratops + Ginkgo for the jumpeurs which want to aim with a system designed and adapted for the strong tensions.
Compound of a pair of pulley triples Triceratops, of 2 Ginkgo, of a rope of 25 m 10.5mm, a Robot (blocker of rope), a link of 6mm and a link of 8mm. Then add according to your needs shackles and system of dismissal.
Warning: Last items in stock!
The kit resides in the triple Tricératops pulleys, pulleys made of stainless steel with high strength steel shaft, and ball bearing high yield complete a sheave 60 mm which allows to achieve an efficiency of 97% which makes the best triple block market, and strength of 80 kN will allow safe jumper.And his double deported eyelet is designed for accuellir your rope blocker and prevents chafing.
Ginkgo when it will preserve the strength of your Jumpline with its sheave 35 mm front axle and 16 mm, resistance of 150 kN (or 110 kN with its stainless steel pin) you will trip over the use pawl. The pin will be more convenient to use.
You can throughout your progression add accessories, lift handles, change of rope blocker, all to optimize your kit that you fit.
2 Ginkgo screw 150 kN or 110 kN pin Inox
1 rope 25 m 10.5 mm (depending on availability 9mm)
1 8mm link
1 link 6 mm
3 shackles CMU 2t, UNO 1 block, 1 steel snap hook, 1 Machard (with or without)
weight: 6.5 kg or 7.8
French note with scheme
Non contractual photo
In Jumpline backups are always essential faires and read the instructions.
Do not stretch beyond the 100 cm of the soil. Although it is composed of material intended for use in highline, highline requiring additional equipment as well as Particular skills, DO NOT USE IN HIGHLINE.
Do not cut pathway, mark your line
Remember to put the protection of trees both for trees but also for your equipment (heavy fabrics, carpet pieces, ... can also be effective and it recycles)
In use above water rinse your equipment with fresh water and let dry in shade even for uses in the lake or pool.