Webbing Anchor

  • Lock Rond alu 25 kN Lock Rond alu 25 kN
    Available
    Lock Round alu 25 kN
    LocR

    Lock Ring allows a similar use to the Basiclock, aluminum with a breaking load of 25 kN.

    5,41 €
    1 Review(s)
  • Rhino Minion Rhino Minion
    Available
    Rhino Minion
    RhiMi

    The Rhino Minion is the mix breeding between the Rhino and Frog, both lightweight 281g and strong with its 60 kN MBS entirely in stainless steel hand welded and tested in independent laboratory. Moreover the Rhino Minion keeps a pin of 12 mm and a central diverter big enough to exploit the strength of the webbing up to 95% as with the Rhino. 100% Made in...

    48,25 €
    6 Review(s)
  • Ginkgo x2 Ginkgo x2
    Available
    Ginkgo mini
    Ginkm

    The Ginkgo mini is the weblock designed for trickline with a lightweight 560 g. Suitable for all webbings from 3 to 5 cm. Made of stainless steel, with a central diverter of 33 mm and a pin of 16 mm, it will allow you to make the most of your webbing and to use tensioning systems other than ratchets. Maximum safety with a WLL of 20 kN and a MBS of 105...

    54,17 €
    1 Review(s)
  • Frog Précommande Frog Précommande
    Online only
    Available
    Frog
    Frog

    The Frog is the first webbing anchor in high-strength stainless steel, very lightweight for a MBS of 60 kN, compatible with all connectors from 8 mm to 20 mm and even with slings. And the shape of the main diverter allows you to use your webbing to 98% of its strength. Of course made in France.

    54,17 €
    1 Review(s)
  • Rhino Rhino
    Available
    Rhino
    Rhino

    Rhino was studied to have a load of use of 10 kN. So his shape allows the best ratio weight resistance.He made of stainless steel 304L (decks, pin). His center of 35 mm coupled with the tie by a pin of 12 mm allows her to overtake the 95 % of resistance of the webbing and thus to protect it. Made in France

    57,50 €
    5 Review(s)
  • Ginkgo x2 Stainless steel Pin Ginkgo x2 Stainless steel Pin
    Available
    Ginkgo Stainless steel Pin
    Ginkgp

    The Ginkgo is a trickline anchor, built to be extra strength solid, with a MBS of 110 kN, it is aimed at all those who want to pull off high amplitude tricks without fear. This has been designed and built to be the highest breaking strength webbing anchor on the market. Intended for webbings of between 40 – 50 mm, it has (WLL) of 20 kN, a 35 mm central...

    66,67 €
    1 Review(s)
  • Paire de Rhino (47.5€ l'unité)
    Available
    Paire de Rhino
    Rhinox2

    Pack of 2 RHINO The Rhino was studied to have a load of 10 kN. Thus its shape allows the best ratio weight resistance.It is made of stainless steel 304L. Its 35 mm center, coupled to the fastener by a 12 mm pin, allows it to exceed the 95% resistance of the strap and therefore to preserve it. Made in France

    100,00 €
    3 Review(s)
  • Stainless steel pin Ginkgo
    Available
    Stainless steel pin Ginkgo
    gogi

    Pin of 16 mm in stainless steel of 110 kN, will allow you to facilitate the utlisation with compared with a classic screw, its high strength will be a security of safety. Compatible with every Ginkgo.Completely in Stainless steel and will be ideal in use of waterline.Made in France.

    22,25 €
    1 Review(s)
  • Ginkgo x2 Ginkgo x2
    Available
    Ginkgo mini x2
    Ginkm

    The Ginkgo mini is the weblock designed for trickline with a lightweight 560 g. Suitable for all webbings from 3 to 5 cm. Made of stainless steel, with a central diverter of 33 mm and a pin of 16 mm, it will allow you to make the most of your webbing and to use tensioning systems other than ratchets. Maximum safety with a WLL of 20 kN and a MBS of 105...

    100,00 €
    1 Review(s)
  • Rhino Minion Rhino Minion
    Available
    Pair Rhino Minion
    RhiMi

    Pair of  Rhino Minion, the mix breeding between the Rhino and Frog, both lightweight 281g and strong with its 60 kN MBS entirely in stainless steel hand welded and tested in independent laboratory. Moreover the Rhino Minion keeps a pin of 12 mm and a central diverter big enough to exploit the strength of the webbing up to 95% as with the Rhino. 100% Made...

    91,67 €
    1 Review(s)
  • Goupille à billes Inox Rhino Frog Goupille à billes Inox Rhino Frog
    Available
    Quickpin stainless Rhino Frog
    Goirf

    100% stainless steel ball pin compatible with Frog and Rhino Minion, use in marine environment, resistant to corrosion.

    25,83 €
  • Calles Rhino Minion ou Frog Calles Rhino Minion ou Frog
    Available
    RHINO MINION OR FROG CALLES
    cfr

    Set of 2 2mm calluses for Rhino Minion or Frog, Made in France in our offices in 3D printing.  Made for webbing use from 20 to 22 mm.

    4,17 €
Accept

Slack Mountain uses cookies to offer you an optimal browsing experience, we suggest you to accept their use by clicking on "I agree". More.