Triceratops is the first triple pulley created and developed for slackline, longline, and trickline.With a WLL of 16 kN and Breaking strength of 80 kN it will be reassuring in any circumstance.With its off centered holes on two plates you can put any rope brake you want.The 60 mm pulleys with tight ball bearing will bring you 97 % efficiency.
The simple pulley with oscillating flask of slack mountain, with her(its) 5 kN of WLL ( 25 kN MBS) it will be completed for your cross-references or to integrate a pulley into the your system.Thanks to his double eyelet of catcher you can easily hang on a machard or a blocker.And his réa of 60 mm coupled with its rotation with tight ball will get for you...
The Pack with a pulley XP2 and a pulley XP2.1, to make up your mouflage completed with a 97 % efficiency per pulley. Their breaking loads of 60 kN thanks to their stainless steel 304l plates will allow you to tighten with no problem at all your longlines.And especially the off-centered attachement of the xp2.1 will allow you to put the rope break outside...
Ball bearing tensioning system for up to 150m lines, requiring additional gear for longer lengths. Consists of: 2 shackles 2t , 2 xp2 pulleys, rope 25m , 1 quick link 8 mm, 1 quick link 6 mm, 1 prussik , 1 Robot , 1 steel carabiner and 1 single pulley .
Poulie ouvrante avec réa de grand diamètre, sur roulement à bille. Pour corde ø 16 mm max. Résistance?: 30 kN. Rendement 96 %.
The Slack Mountain webbing pulley is compatible on all 18mm to 28mm webbing and minimizes friction thanks to its stainless steel ball bearings. Flask with rounded edge. Compatible for use with oval carabiner. CMU 5 kN. 135 g It's not an EPI.
Tensioning system SlackMountain. The ultimate tensioning system for your longlines and trickline. With rope-break and multiplier.Composed of 2 pulleys Triceratops, 33 m of 9 mm rope, 1 quicklink of 6 mm, 1 lquicklinkink of 8 mm, 1 Robot (rope-break), 1 prussik, 1 carabiner of 8 mm (multiplier), and a pulley UNO of slack mountain.With its weight of 3.65 kg...
Triceratops is the first triple pulley created and developed for slackline, longline, and trickline. With a WLL of 16 kN and Breaking strength of 80 kN it will be reassuring in any circumstance. With its off centered holes on two plates you can put any rope brake you want. The 60 mm pulleys with tight ball bearing will bring you 97 % efficiency.
Pack Tension Light with a weight of less than 900g, it will allow you to reach 6kN (tensioning aproximately 60-70m). Thanks to its double pulleys Mini Twin Kong of 150g 30 kN with ball bearing, efficiency will be there for you. Ultra compact you can bring it anywhere.
XP2.1 is the double pulley with off-centered attachement point developed specifically for slackline. The 60 mm pulleys with tight ball bearing will bring you 97 % efficiency. The plates in Inox 304l ensure an optimal breaking strength of 60 kN. Compatible with shackles up to 20 mm. The off-centered attachement point allows for all rope breaks outside of...
Poulie simple à flasque fixe pour cordes de diamètre maxi 12 mm
Need to stretch out your slackline and to be able to remove pulleys. Machard-Drisse is made for you. With Cmu until 8 kN you can stretch out the majority of your lines (slack hybrid are not compatible). And with a system of 196 g you can take it everywhere.
XP2 is the double pulley developed specifically for slackline.The 60 mm pulleys with tight ball bearing will bring you 97 % efficiency. The plates in Inox 304l ensure an optimal breaking strength of 60 kN. Compatible with shackles up to 20 mm. Entirely made in France.
Pulley captive blocker high efficiency. With a sheave of large diameter and high yield , it is particularly suited to hauling rope requires the least loss. The flange locked under load prevents the opening of the pulley in use .
Poulie ouvrante double de grand diamètre, montée sur roulement à billes étanche.Pour corde Ø 16 mm maximum. Rendement 96 %.Résistance?: 50 kN.
Poulie legere à flasque oscillante sur roulement à billes. avec une CMU de 6 kN (1.5 par brin) et une charge de rupture de 30 kN, pour un poids de 150 g. De quoi composer un kit de tension ultraleger.
Poulie double légere avec plaques latérales fixes. Climbing technologyElle permet d'effectuer des tyroliennes sur cordes ou de câbles. Jusqu'à trois mousquetons peut être accroché dans le grand oeillet. poulies en acier inoxydable monté sur quatre roulements à billes
MICRO TRAXION pulley is ultra-light blocker just 85 g and especially ultra-compact with a very good efficiency of 91% with ball bearing. Its blocking trigger can be locked open and it turns into single block.
Twin pulleys compact, for the realization of mouflages. Rotation on ball bearing: efficiency raised for an intensive use and to high speed. efficiency: 92 %. Workload maximale:1,8 kN x 4 = 7 kN for a weight of 155 g