Made in France Delivery Worldwide
Product successfully added to your shopping cart
There are 0 items in your cart. There is 1 item in your cart.
The Pack with a pulley XP2 and a pulley XP2.1, to make up your mouflage completed with a 97 % efficiency per pulley. Their breaking loads of 60 kN thanks to their stainless steel 304l plates will allow you to tighten with no problem at all your longlines.And especially the off-centered attachement of the xp2.1 will allow you to put the rope break outside...
Tensioning system SlackMountain. The ultimate tensioning system for your longlines and trickline. With rope-break and multiplier.Composed of 2 pulleys Triceratops, 10.5 mm rope, 1 quicklink of 6 mm, 1 lquicklinkink of 8 mm, 1 Plaquette Gigi or Robot (rope-break), 1 prussik, 1 carabiner of 8 mm (multiplier), and a pulley single kratos.With its weight of...
Triceratops is the first triple pulley created and developed for slackline, longline, and trickline.With a WLL of 16 kN and Breaking strength of 80 kN it will be reassuring in any circumstance.With its off centered holes on two plates you can put any rope brake you want.The 60 mm pulleys with tight ball bearing will bring you 97 % efficiency.
The Slack Mountain webbing pulley is compatible on all 18mm to 28mm webbing and minimizes friction thanks to its stainless steel ball bearings. Flask with rounded edge. Compatible for use with oval carabiner. CMU 5 kN. 135 g It's not an EPI.
The simple pulley with oscillating flask of slack mountain, with her(its) 5 kN of WLL ( 20 kN MBS) it will be completed for your cross-references or to integrate a pulley into the your system.Thanks to his double eyelet of catcher you can easily hang on a machard or a blocker.And his réa of 60 mm coupled with its rotation with tight ball will get for you...
Snap Kit with Frog and double block XP2 bearing high performance balls. For experienced practitioners who want a complete and ready to use kit. Comes with 50 or 100 m you can webbing the only tender and with a single reference. Completely scalable and capable of great distance. The Slack Mountain products are manufactured entirely in France.
Triceratops is the first triple pulley created and developed for slackline, longline, and trickline. With a WLL of 16 kN and Breaking strength of 80 kN it will be reassuring in any circumstance. With its off centered holes on two plates you can put any rope brake you want. The 60 mm pulleys with tight ball bearing will bring you 97 % efficiency.
Need to stretch out your slackline and to be able to remove pulleys. Machard-Drisse is made for you. With Cmu until 8 kN you can stretch out the majority of your lines (slack hybrid are not compatible). And with a system of 196 g you can take it everywhere.
XP2 is the double pulley developed specifically for slackline.The 60 mm pulleys with tight ball bearing will bring you 97 % efficiency. The plates in Inox 304l ensure an optimal breaking strength of 60 kN. Compatible with shackles up to 20 mm. Entirely made in France.
XP2.1 is the double pulley with off-centered attachement point developed specifically for slackline. The 60 mm pulleys with tight ball bearing will bring you 97 % efficiency. The plates in Inox 304l ensure an optimal breaking strength of 60 kN. Compatible with shackles up to 20 mm. The off-centered attachement point allows for all rope breaks outside of...
The Kit Op with Frog and double pulleys xp 2 and 2.1 on ball bearings. You set up to 100m with a single multiplier. It is essentially a complete longline tensioning kit, ready to use. Sold without webbing. The Slack Mountain products are manufactured entirely in France.
The Ginkgo mini is the weblock designed for trickline with a lightweight 560 g. Suitable for all webbings from 3 to 5 cm. Made of stainless steel, with a central diverter of 33 mm and a pin of 16 mm, it will allow you to make the most of your webbing and to use tensioning systems other than ratchets. Maximum safety with a WLL of 20 kN and a MBS of 105...
The Ginkgo mini is the weblock designed for trickline with a lightweight 560 g. Suitable for all webbings from 3 to 5 cm. Made of stainless steel, with a central diverter of 33 mm and a pin of 16 mm, it will allow you to make the most of your webbing and to use tensioning systems other than ratchets. Maximum safety with a WLL of 20 kN and a MBS of 105...
Loading...